CC-100 Crack Chasing Saw
Part Number: SX90102
The CC-100 is a gas-powered crack-chasing saw, expertly designed to route out random cracks in concrete and asphalt surfaces for filling with repair products or sealants. Ideal for use on parking garages, runways, and large open warehouses, this saw cuts up to 1” deep and ½” wide with precision.
The CC-100 delivers high production rates and accuracy by allowing the operator to pull the saw backward, providing a clear view of both the blade and the crack being cut. Its frame geometry enhances maneuverability, enabling effortless pivoting and intuitive operation.
For effective dust control, the CC-100 supports multiple dust port configurations, accommodating various vacuums and hose sizes. U.S.SAWS recommends using a vacuum with a minimum of 350 CFM for optimal performance.
1. What is this machine used for?
Routing out random cracks in concrete or asphalt prior to filling the cracks with a sealant. It is mostly used in parking garages, lots, and large warehouses where cracks need to be filled for waterproofing.
2. How deep does it cut?
1″ deep max with a 6″ blade.
3. How wide does it cut?
1/2″ is the max, however most people use a 1/4″ or 3/8″ width blade. Either a square segment or “V” blade is acceptable.
4. What size vacuum do I need?
300 cfm minimum. The U.S.SAWS Ultravac 1250 G is a good choice.
5. Can I cut wet with it?
This machine is intended to be used dry
6. Does it use special blades?
The blades must have a 5/8″ arbor, have a drive pin hole, and undercut protection segments.
7. How do you see the crack your cutting?
The operator pulls the machine backward, so they can see the blade making it’s way through the crack. This position makes this saw very accurate and efficient.
1-877-817-6687
sales@ussaws.com
Weight: 
